ProofKleen verified cleaning
Cleaning you can audit.
ProofKleen cleans when evidence shows it is needed and verifies every clean with a checklist, a swab where required and a time-stamped photo. If a check fails, we re-clean at our expense.
Every clean records
Proof-of-Clean
- Date, zone and shift
- Method, product and dwell time
- Visual check result
- Swab result where required
- Time-stamped photo
- Pass, or re-clean until it passes
The problem
Your cleaning contract shows hours. Can it show proof?
Traditional cleaning follows a fixed calendar. Clean surfaces get cleaned again because the schedule says so, while busy areas can fall behind between visits. At the end of the month you get an invoice for hours, not evidence of results.
ProofKleen follows proof of need and records proof of clean, so effort goes where it matters and you can see the result of every visit.
Traditional cleaning
- Cleans on the calendar
- Same effort for every area
- Proof is a timesheet
- Re-dos can mean extra charges
ProofKleen
- Cleans on evidence of need
- Effort follows risk and use
- Proof is a photo and a result
- Failed checks re-cleaned free
How it works
Need. Action. Verify.
Every ProofKleen visit follows the same five-step loop.
01
Need
A scorecard, occupancy count, hygiene swab or hygiene ticket shows cleaning is needed.
02
Action
We clean the surfaces that triggered, using the right method, product and contact time.
03
Verify
Every clean is checked against a checklist, swabbed where required and photographed with a time stamp.
04
Fail? Re-clean
A failed verification is re-cleaned and re-verified on the same visit, at our expense, until it passes.
05
Prove
You see the record for your own site, and the pilot report shows frequency, pass rates and projected savings.
What starts a clean
Four triggers. Never the calendar alone.
A cleaning starts only when one of these shows it is needed.
Failed scorecard
Each surface is scored Acceptable or Action Required before cleaning. Action items trigger a clean.
Occupancy or traffic threshold
Heavy-use days, bookings and traffic counts trigger a clean when they pass the agreed threshold.
Failed hygiene swab
A protein residue swab that changes colour on a pre-clean check triggers a clean.
Hygiene ticket
A concern raised by you or your staff is logged, cleaned and verified, with the result recorded.
Risk-based zones
More attention where risk is highest
Every zone in your building is scored for Contact (how often it is touched, 1 to 5) and Consequence (what happens if it is missed, 1 to 5). The two multiply into a Risk Score that sets how closely the zone is watched and how it is verified.
Washrooms, lunchrooms and clinical areas stay in the highest tier even when they score clean, so they are always swabbed and photographed.
HIGH
Risk Score 15 or more
Washrooms, lunchrooms, kitchens and clinical zones.
- Swab and photo on every verification
- Scored most often
MEDIUM
Risk Score 8 to 14
Meeting rooms, entrances and common areas.
- Scored after heavy use or traffic
- Visual check and photo
LOW
Risk Score 7 or less
Private offices and low-traffic rooms.
- Cleaned on trigger only
- Never cleaned just because of the calendar
A failed check is our cost, not yours.
If a verification fails, we re-clean and re-verify on the same visit until it passes. Both the failed result and the final pass are recorded, and re-cleaning is never billed. Quality is not an upcharge.
Start with a pilot
Find out what your building actually needs in 45 to 60 days
The pilot runs on agreed zones of your facility so the decision rests on your own data, not our promises. It does not renew automatically. At the end you decide to expand, adjust or stop, with no further obligation.
01
Baseline
We record your current cleaning pattern and score your zones to set the starting point.
02
Active protocol
Cleaning only on proof of need. Every clean is verified and recorded with a photo.
03
Weekly summaries
Cleanings needed, pass rates, re-cleans and requests, every week.
04
Final report
Frequency, pass rates and projected savings, with a recommendation.
Who it is for
Built for facilities that need proof
ProofKleen fits organizations that care about cost, documentation and high-risk areas.
Offices and property managers
Stop paying to clean clean surfaces, and show owners and tenants the record.
Healthcare and clinics
Clinical zones are high tier with a swab and photo on every verification. Surface and room cleaning follows your facility protocol.
Schools and education
Classrooms are scored on schedule and cleaned on trigger, including after illness reports.
Retail and public spaces
Customer washrooms are swab-verified, and entrances are scored before opening.
Multi-site portfolios
One standard, one zone map and one reporting format across every building.
Finance and ESG teams
Auditable records and less chemical and labour waste from unnecessary cleans.
A good time to run a pilot
- Your cleaning contract renews in the next 90 to 180 days
- Repeated complaints or an unresolved quality issue
- Budget pressure or a cost-reduction mandate
- An audit finding or health and safety review
- ESG reporting that asks about chemical and labour waste
FAQ
ProofKleen questions
Want to see a verification in person? Contact us and we will walk you through one at your site.
ProofKleen is a verified cleaning program from SKI Integrated Facility Services. It cleans when evidence shows it is needed and verifies every cleaning. You see the proof: date, zone, result and photo.
Regular cleaning follows a fixed calendar. ProofKleen follows proof of need and records proof of clean, so effort goes where it matters and you can see the results.
Four triggers start a cleaning: a failed scorecard, an occupancy or traffic threshold, a failed pre-clean hygiene swab, or a hygiene ticket from you or your staff. A calendar alone never starts a cleaning.
Each cleaning has a verification record showing method, dwell time, a visual check, a swab result where required, and a photo. You can see these records for your own site.
We re-clean and re-verify on the same visit until it passes. Both the failed result and the final pass are recorded. Re-cleaning after a failed verification is at our expense.
It means cleaning is directed by evidence. Some zones may be cleaned less often and others more often. The pilot compares pass rates and cleaning events with your current approach so you can see the effect.
A protein residue swab is wiped across a surface and changes colour when residue is present. We use it to confirm surfaces in higher-risk zones. ATP testing is optional on some packages.
No sensors are required. The program relies on scorecards, logs, swabs, photos and records.
A 45 to 60 day trial on agreed zones: a baseline period, then the active protocol with weekly summaries and a final report. It does not renew automatically. You decide to expand, adjust or stop.
You see your own site activity: date, zone, result and photo. Internal notes are not shown to clients.
Before you renew, run the pilot.
Book a site walk and we will propose a 45 to 60 day ProofKleen pilot on the zones that matter most to you.
